Many mistakes can occur when towing a car. Here are tips on how to properly hook a vehicle. Only vehicles that are no longer ready to drive may be towed. If the electrical system fails, a professional towing company must be hired. The breakdown area should first be secured if a car is parked on the motorway or obstructs road traffic.

When towing maybe with Slide car Hatairat (รถสไลด์หทัยราษฎร์ which is the term in Thai) for instance, drive slowly (not faster than 50 km / h) because the steering and braking systems will not work if the engine fails. At low speeds, the driver of the breakdown vehicle has enough time to react.

It can be towed with a rope or a solid bar. These are to be attached to the respective tow hook of the vehicle – but not diagonally because otherwise, the car could break away. Ropes or rods may not be longer than 5 m and must be identified, for example, with a red flag.

Anyone towing a car should bring it to its destination using the shortest route possible. Special features in the operating instructions should be observed for cars with automatic transmissions, hybrid or electric vehicles. Both vehicles must switch on the hazard warning lights and, in the dark, the lights.

Anyone towing a vehicle needs a valid driver’s license. The driver of the defective vehicle does not require a driver’s license but should be suitable in terms of height, strength, and experience to bring the car safely to its destination.

The driver of the breakdown vehicle always disengages. If the blinker is defective, it shows following vehicles’ direction changes with a hand signal. The tow rope must be kept as taut as possible while driving. If possible, it is advisable to practice starting and braking in safe places such as parking lots.

Towing on the motorway is only permitted if the highway breaks down. This must be left at the next exit. Anyone who continues to drive must expect a fine. Driving onto the motorway with towed vehicles is generally not permitted.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *